Shopping Cart

Your cart is currently empty.

Why Isn’t My Power Unit Pumping Fluid?

THE PROBLEM: Power unit runs fine but will not pump any fluid.

Do you have a power unit that is working but not pumping fluid? Before you give us a call, our resident expert tells the fix and it’s so easy to do!

 

power unit priming diagram

Step 1 – Locate the check valve, the flush plug to the left of the lowering valve.
(See illustration.)

 

Step 2 – Using an Allen wrench and shop towel – with shop towel in place to catch fluid – loosen the check valve plug 2-1/2 turns to allow it to leak.

 

Step 3 – Push the START button for one second, then release for three seconds.

Repeat these steps until the unit starts pumping fluid.

 

Step 4 – Tighten the check valve.

 

THE POWER UNIT SHOULD BE PRIMED

True Life: Surviving an Automotive Related Accident

If you did not believe that a car lift was a wise investment, you may change your mind after reading this.

22-year-old Lauren Kornacki was named a hero after she lifted up a car weighing a ton and a half to save her father, Alec Kornacki, 52, who became crushed underneath after a Jack slipped.

Lauren ran to her father’s aid when a jack slipped as he worked under his BMW 525i on July 29th, at the family’s home in Glen Allen, Virginia. Lauren happened to be on her way out the door when she saw her father pinned under his luxury car.

“It flashed like; I’m going to lose my dad. His eyes were open; he wasn’t responding to me. I knew I had to get his heart beating again, and I had to get him breathing. I lifted it up … kind of threw it, I just shoved my body into it as hard as I could, and then I came back and dragged him out and started CPR,” Lauren told NBC 12, who was trained in CPR from her job as a lifeguard.

Two days after the incident, Alec Kornacki was still in the ICU with several broken ribs and various other fractures, but he was walking, reported CNN.

This real life accident is an example of how dangerous ground jack lifts can be, and shines a positive light on automotive lifts. Jack lifts may be a cheaper alternative, but are certainly not the safest. Automotive lifts are designed to make working on vehicles easier and prevent accidents such as this one.

Four Maintenance Tasks For for Your 2-Post Car Lift

Mechanics Car Lift UsesIf you own a mechanic shop or you like to do work on your own vehicles, you might be in the market for a car lift. Car lifts make performing routine and complicated maintenance much easier because you do not have to get down on the ground or under the car. There are several different types of lifts, but the most popular are the 2- and 4-post lifts. At Eagle Equipment, we carry both.

4-post lifts are more suitable for vehicle storage, and 2-post lifts are a lot better for major reconstruction and mechanical repairs. Realize which projects are easier when you own a 2-post lift and make the right investment.

Below, find four common repairs that can be done more efficiently with a 2-post automotive lift.

1. VROOM! VROOM! Working on the Engine
If the full frame is under the body of the car and you are working on the engine, a 2-post application will make it easy for you to lift the car up off of the engine and the suspension sub frames. This makes the job less involved and complicated.

2. Transmission Repairs
Hoisting the car off of the ground with a 2-post application will also make for easier transmission repairs. They will provide easy access to the transmission from the undercarriage of the vehicle and will prevent causing damage to other vehicle components you would have to bypass when working under the hood.

3. Tire Rotations
When you are doing tire rotations you need all of the wheels to be off of the ground. These lifts are far more convenient then using a car jack and will prevent errors and injuries when you are rotating tires. It will take less time to complete this type of project. Using a car jack can be dangerous because it can easily slip while you are working under the vehicle.

4. Quick and Easy Oil Changes
If you do not want to get dirty while you are doing an oil change, a car lift is the answer. These lifts will give you easy access to the oil pan so you can perform oil changes in less time.

Working on difficult projects or even routine tasks is much easier when you have the right equipment, so it’s time to invest in an automotive lift! You can keep your customers satisfied and get your home projects done quickly so you can enjoy your free time. Shop Eagle Equipment Lifts now.

Car Lifts: Staying Safe

The biggest danger of automotive lift operation is improper or inadequate training. Although some automotive lifts may appear to be simple to use, it’s important that owners of lifts take the time to properly train their lift operators thoroughly.

Working with a car lift can be hazardous, particularly if the vehicle falls off the lift, so all safety rules should be followed at all times. Once the lift has elevated the car; the danger of falling debris and objects increase. It is important for lift operators to wear safety glasses to protect their eyes from falling dirt and debris as well as hard hats to protect their heads from accidental bumps or falling car parts that might have loosened during the repair process.

Listed below is a general checklist of do’s and don’ts, to keep you safe, when operating your car lift.

Do’s

  • Ask for training from your employer before you operate the lift for your first time.
  • When you arrive at work, do an inspection of the lift prior to your shift.
  • Make sure the lift’s locking devices engage.
  • Wear safety glasses for work done under the car.
  • Make sure the vehicle is centered and balanced on the lift as described in a service manual.
  • If the lift is of the drive-on type, be sure to use chocks behind the wheels.
  • Check ceiling clearance before raising trucks and RVs.
  • Gently check to see if the car is stable when it is at knee height.
  • Clear the area of tools and bystanders before lowering the lift.

Don’ts

  • Never raise a vehicle that has occupants.
  • Don’t exceed the capacity of the lift.
  • Never stand below a vehicle on a lift that does not have the locking devices engaged.
  • If vehicle support stands are used (such as in the case when an engine or transmission has been removed), do not lower the vehicle onto the support stands because this might push the car off the lift. Instead, bring the supports up to make solid contact with the vehicle once it has reached the proper height.
  • Do not try to repair a faulty lift yourself. Let your supervisor know that the lift needs attention.

 

At Eagle Equipment we want to make sure our consumers are following automotive lift safety rules. To ensure this our company has taken the time to make a manual to read before installing or operating the lift. Manuals can be accessed on any of our products from their product page online at www.eagleequip.com. We will also be sending a training DVD with the proper use of your lift when you order. The safety of you and your lift operators is very important to us!

How To Decide If You Are Buying The Right Lift!

Before you purchase a new lift, there are a few questions that will need to be answered. Ask yourself these crucial questions to figure out which automotive lift may be the best fit for you and your garage.

How tall is your ceiling?
While measuring your garage or shop, take into account obstructions such as garage door openers, door tracks, attic staircases, etc… Continue reading How To Decide If You Are Buying The Right Lift!

Buy Before January 1st to Save Thousands.

It’s December already, can you believe it? Where does a year go? With the year coming to a close, you may hear a lot about “Section 179” and how you’re business can benefit if you are looking to purchase some equipment before 2013.

We get just as confused as the next guy when you start talking “tax rate”, “deductions” and “depreciation”. We thought we would do a little research and try to explain how this could be a HUGE benefit to small businesses. Continue reading Buy Before January 1st to Save Thousands.

Turn Your 3 Car Garage into a 4 Car Garage in No Time (without any construction!)

We love to get nice emails from customers to let us know how happy they were with their Eagle purchase. This morning we got an email from Lynda, who had 5 cars and said that her neighbors were starting to give her “the look”, if you know what I mean! She ordered Eagle’s MS-8000.

Hi Andy,

I wanted to tell you how happy I am with my lift and [the installer you recommended] did a great job installing it. Everyone in the neighborhood knows me now and I am known as Lynda with the lift. Even people I have never met have heard about my lift from my neighbors.

I am so glad I did it.

Lynda

 

American Automotive Equipment is Now “Chinese Automotive Equipment”

Sources inside China say that American Automotive Equipment has sold out to a Chinese manufacturing company. That Chinese company has taken a 51% ownership position in American Automotive Equipment. American Automotive Equipment is a competitor of Eagle Equipment.

The move was made after American Automotive Equipment was unable to pay their bills to the Chinese creditors.  All profits of American Automotive Equipment will now flow to China to satisfy the outstanding debt.

This move will put many companies, including Eagle Equipment in jeopardy. The Chinese-owned American Automotive Equipment will have a lower cost basis and will not be burdened by important after sales services such as product warranty and support.

It remains to be seen how many American jobs will be lost as a result of this transaction.

NASCAR DRIVER ORDERS EAGLE LIFTS TO STORE RACE CARS

Bobby Labonte Race Car Storage LiftsGuess who ordered four Eagle lifts this month? We’ll give you a hint….. he’s a Nascar driver and has lots of cars he needs to store.

That’s right, you can add Driver Bobby Labonte to the Eagle list of satisfied customers. He ordered four of our popular MS-8000xlt 4-post storage lifts.

You know Eagle is a trusted brand when a race car driver trusts our lifts to store his race cars. Why did he choose Eagle? The same reason most of our customer’s do…. he heard great things about us! Since we have been in business since 1954, we have plenty of happy customers that practically sell our products for us.

We installed 4 of our Eagle MS-8000xlt’s in his garage. Here are a few pics of the final installation. Thanks Bobby for choosing Eagle Equipment.Bobby Labonte MS-8000xlt Eagle Car Lifts

If you want to join Bobby and become an Eagle customer,  visit our Website for our full line of Auto servicing and storage lifts.Bobby Labonte buys 4 MS-8000xlt Eagle Car Lifts

 

Sign up to our newsletter & Receive Savings In Your Inbox

Sign Up

Copyright © 2024 Eagle Equipment. | Ecommerce Shopping Cart Software by Miva, Inc.