Shopping Cart

Your cart is currently empty.

RUB BLOCKS ON YOUR CAR LIFT: 2-Post and 4-Post lifts

IMG_271

In the past few months, we have had some customers who own older Eagle Lifts (at least 10 years old) order new Rub Blocks for their lifts. Most lift operators are unsure exactly what a rub block is, why we use them in our lifts an how they are replaced.

IMG_27
9,000 lb two-post lift rub block

Rub blocks are an important part of each lift and have a major role in making sure the lift performs the way it should. Eagle uses a nylon rub block for each of our 2-post and 4-post lifts. Rub blocks are installed on the carriages of the 2-post car lift, at the top and bottom of each carriage – 8 total per side.  On the 4-post lift, a 10”x 3” rub block, 2 per post (8 for each lift) are bolted on to the end of each cross member on the four corners of each carriage, top and bottom.

IMG_2705
Rub Blocks from Left to Right: 12K 4-post, 9K 2-Post, 10K 2-post and 12K 2-post

Once installed, the rub blocks become a stabilizer for the lift while going up and down. These rub blocks are the bridge between the actual lift post and carriage, or cross member.  The rub blocks are designed to secure the carriage or cross member inside each lift post and not allow any movement during use. The nylon creates a steady and smooth lift. We recommend a lubricant in each post to reduce the friction of block, and help with the travel of each lift. Continue reading RUB BLOCKS ON YOUR CAR LIFT: 2-Post and 4-Post lifts

IMPROVED! The NEW 10,000 lb Two-Post Certified Car Lift From Eagle Equipment

MTP-10V3-3Our certified symmetric lift and our certified asymmetric lift are now combined in one versatile lift, the Eagle ECL-10AS.

The ECL-10AS Certified Car Lift from Eagle features the ability to be installed as a symmetric or asymmetric lift, determined upon the needs of your shop. The ECL-10AS features 3-stage rear arms, providing maximum extension ensuring safe and reliable lifting on all vehicles within the rated capacity.

Some of the features that make this one of our most popular two-post certified car lifts include: adjustable height and width options, triple telescoping spin up pads, durable powder-coated Eagle blue finish, plated arm restraints and pins as well as the many other features.  This Eagle Certified car lift will easily handle the rigorous demands of a full service facility. All Eagle lifts are designed and manufactured to our highest standards.

  • ALI/ETL certified (tested at 15,000 lbs)
  • 10,000 lb two-post lift
  • Shipped with everything you need to setup either symmetric or asymmetric
  • Adjustable column height. Provides an extra 6″ of height adjustment for ease of installation with various ceiling heights.
  • Adjustable column width. Provides an extra 6″ of width adjustment for narrow service bays to custom fit your shop.
  • Rubber door guards. Provides added security against door damage.
  • Outer hose guards. Protects hydraulic hoses from damage.
  • Double telescoping spin up pads
  • Heavy-duty arm restraint system. Oversized rugged steel gears, pins and springs.
  • Single-point lock release allows technician to disengage both columns simultaneously
  • Set of adjustable height adapters: two 6″ and 3″ extensions

Just $2499 + Shipping
Click here to see it online!

 

               Symmetric Setup                   Asymmetric Setup
Max Lifting Height

76.4″

Minimum Column Height

143″

Cylinder Full Height

145.2″

Total Width

136.6″

137.9″

Drive Thru Clearance

98.4″

92″

Floor to Overhead Switch

140″

Front Arm Reach (min/max)

23.6″/43.5″

Rear Arm Reach (min/max)

38.6″/61.8″

Spin Up Pad Height

4″ – 7.5″

Inside Column Width

110.2″

101.9″

Motor

2hp

Voltage

208-230 volt / 1 phase

Rise

55 seconds

Max Load per Arm

2500lbs

Minimum Ceiling Height Req.

143.5″

 

Sign up to our newsletter & Receive Savings In Your Inbox

Sign Up

Copyright © 2019 Eagle Equipment. | Ecommerce Shopping Cart Software by Miva, Inc.