Do you have a two-post lift but need a four-post lift for the value of being able to do alignments? We have the product you are looking for.
Recently at Eagle Equipment, we have designed and manufactured a new product to change your 2-post lift, into a 4-post service/alignment lift.
The new EAS-4 alignment stands can be added to any Eagle Equipment 9,000lb or 10,000lb 2-post auto lift, or to the PMR-6000-48 midrise lift. These stands will allow the small garage owner to add alignment services to their shop, at minimal cost, without adding a four-post lift.
To use the new Eagle stands, simply raise your vehicle higher than the 36” needed and add the stands under each wheel. Once the stands are in place, lower the vehicle slowly until the car’s weight is supported by the stands. You now have the benefits of having a four-post lift in your shop. All you need to do now is add turn plates to the stands, and you are now ready to do alignments.
- Max Weight Per Stand = 1,500 lbs
- Pad height = 36″
- Pad dimensions = 19.5″ x 19.5″
- Footprint = 38″ diameter
- Adjustable leveling feet
- Each Stand Weighs 100 pounds
- Powder coated
- Made of 3/16″ steel