Automotive Equipment Archives : Page 2 of 2 : Eagle Equipment

Proper Lift Installation—Floor Requirements and Preparation

At Eagle Equipment, ensuring our customers’ safety is our primary concern. Your car lift was designed and built with safety in mind. However, safety relies on proper installation and training. Prepare for a successful installation by making sure your floor meets specific requirements. We would like to emphasize the following floor requirements for installing 2-Post and 4 post car lifts.

Site Selection
Before installing your car lift, check the following:
• Lift Location: Always use architect’s plans when available. Check layout dimension against floor plan requirements making sure adequate space is available. Your lift
requires a 220v, 30amp, single phase, grounded electrical source. There should be room enough to operate the lift in a safe manner and without restrictions.
• Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc.
• Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete.

Floor Requirements
• A level floor is suggested for proper installation and level lifting. Small differences in floor slopes may be compensated for by proper shimming. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab.
• New concrete must be adequately cured for at least 30 days.

DO NOT install auto lift on any asphalt surface or any surface other than concrete.
DO NOT install auto lift on expansion seams or on cracked or defective concrete.
DO NOT install auto lift on a second/elevated floor without first consulting building architect.
DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions.

Concrete Specifications
All models MUST be installed on 3,000 PSI reinforced concrete only. Additional concrete requirements will vary by lift.

8,500 lbs – 10,000 lbs lifts: 4″ Minimum Thickness
11,000 lbs – 15,000 lbs lifts: 6″ Minimum Thickness

Specifications of concrete must be adhered to. Failure to do so could cause auto lift failure resulting in personal injury or death. All of our automobile lifts include a manual with floor and concrete specifications . Adhering to these specifications will ensure a safe and successful installation.

Please visit the Eagle Equipment site for more information and online product manuals.

Free Freight Misconception

The old saying, “There is no such thing as a free lunch”, supports the concept that you cannot get “something for nothing.” Many online businesses advertise “free freight” so consumers will believe they are getting a great deal. Merchants are actually just hiding shipping and freight charges by marking up the price of the product. Shipping and freight providers expect to be paid for their services which include palletizing, packing, loading, transporting, documentation, insurance, and unloading. These services can account for up to 50% of a product’s cost and it is you, the consumer, who pays for this whether it is added separately or included in the product price.

Eagle Equipment chooses to itemize these charges to be upfront with our customers. We will do everything we can to offer the best freight pricing without lowering our standards. Our shipping department makes every effort to ship your car lift or tire equipment in a manner that allows for easy offloading, which includes arranging a carrier and extending the discounts provided to us by our shipping partners. When possible, a flatbed is used to transport larger automotive repair equipment.

We also take pride in offering “great customer service” which includes accessibility, product knowledge, support, and innovation. So, when you are shopping for a car lift, wheel balancer, tire changer, or auto repair tools and equipment, make sure you do your research. Free freight may seem like a bargain at first, but in the end products with free freight may not provide the value anticipated by consumers.

Shop Eagle Equipment

Good Guys Car Show – Eagle Lift MS-8000

Eagle Equipment had a very successful showing at the Good Guys event in Charlotte, NC! Most of the vendor spaces were occupied making for a busy and fun car show.

Eagle displayed a MS-8000 and also offered show specials.

Many of our customers that had purchased car lifts from us at other shows stopped by to let us know how pleased they were with their equipment.

If you have some testimonials or comments on our products, please post them. We love to hear from you.

Motorcycle Lift or ATV Lift for 1,500 lbs

Eagle Equipment has introduced a new heavy duty Motorcycle/ATV Lift. This Motorcycle Lift has a 1500 lb lifting capacity, an air/hydraulic pump, comes standard with side extensions and vise, and has an extra large holding platform. This automotive lift can be used for motorcycles, ATVs, Jet Skis, Snowmobiles etc.

This motorcycle lift sells for $1129. Shop the ML-1500 motorcycle/atv lift.

Wheel Balancer Benefits

The right wheel balancer used the right way can help customers enjoy the ride of their car, increase tire life and help get more mpg! It is important to use your wheel balancer correctly to achieve the maximum results.

Certain wheels such as alloy wheels or oversized wheels can be more difficult to balance properly especially when they have hidden tape weights. The good news is that most modern wheel balancers will accommodate the hidden weights.

The key to success in using a wheel balancer correctly to achieve desired results is to mount the tire correctly. Wheel balancers cannot adjust readings if the wheel is mounted incorrectly.

Shop Wheel Balancers at Eagle Equipment.

Eagle Equipment at the Good Guys Car Show

Come by and visit Eagle Equipment at the 16th annual Good Guys Southeast National Car Show. The show will be held from Oct 30th through Nov 1st at the Lowe’s Motor Speedway in Charlotte, NC.

Eagle Equipment will be in Booth #40 so come by for show specials. Ask for Andy!

Tips for Buying an Automotive Car Lift

Here are some tips to help you have a good experience when buying a car lift.

Be sure when you call the auto lift company that a person answers the phone.
Call Customer Service which might be a different line from the sales line. Look for Customer Services’ phone number in the car lift manual which should be emailed to you or found on the vendor’s website. Be sure you can get in touch with someone if you have questions or problems prior to buying the product. Does the supplier have a customer service department as a part of their company or are they sending you to a 3^rd party company?
Ask the lift company for a total price including exact (not estimated) freight. Compare total prices between vendors not just the lift price.
Ask for an exact ship date and a delivery date (not estimated dates). Lift companies should be able to provide you this information.
Check https://www.ripoffreport.com to check on the company.

Eagle Equipment has 7 product specialists to answer the phones so call us and you can talk to a person. We can provide you with exact shipping costs and the total price for the product.

We have our own customer service department to handle post sale questions.

AUTOMOTIVE EQUIPMENT PICK-UP GUIDELINES

Our products are designed to be shipped via common carrier freight lines and this is the shipping method that we recommend. However, for convenience, we will allow customers to pick up their automotive equipment within the following guidelines:

1. All orders picked up will be subject to applicable North Carolina sales tax unless buyer has provided a NC Sales Tax Exemption Certificate.

2. Customers are not allowed in the warehouse area without a salesperson. Customers may not assist or interfere with the loading of the auto equipment.

3. Customer is responsible for any damages to the equipment and/or their vehicle resulting from the loading and transporting of the equipment.

4. Vehicle weight restrictions will be strictly observed. Customer may be asked to provide weight restriction information on trailers.

5. Eagle recommends side loading of car lifts onto vehicles. When this is not possible, the automotive equipment will be rear loaded. Eagle will make its best effort to center the load weight. However, customer will be responsible for any shifting or falling of equipment or off-centered load that results in damage.

6. Equipment will only be loaded right side up.

7. Customers are responsible for strapping down their equipment on the vehicle. No load will be allowed to leave the premises without being strapped down.

8. Pick up vehicles must have sufficient width and length to insure that the equipment does not protrude illegally from the vehicle. Trucks with tailgates must be able to fully close the tailgate with the equipment inside.

9. Car lifts will not be loaded onto pick-up trucks.

10. Automotive equipment will not be loaded onto vehicles that appear to be unsafe or lack proper equipment. This will be determined at the sole discretion of the Eagle warehouse supervisor.

These requirements have been established to help insure the safety of you, your vehicle, and your equipment. If your vehicle does not meet the above requirements, we suggest that you let our logistics department obtain the best shipping quote possible for your equipment.

I have read, understand, and agree to the requirements above:

Signature: __________________________________________ Date: ________________________

Customer vehicle inspected and loaded by: ____________________________________

Receiving Your Shipment of a Car Lift, Tire Changer, Wheel Balancer, Spray Booth or Auto Body Shop Supplies

Thank you for choosing Eagle Equipment for your automotive equipment needs. Whether your order ships UPS, LTL (Less Than Load, i.e. Estes, FedEx ), below are a few tips to make receipt of your car lift, tire changer, brake lathe, wheel balancer, spray booth or other auto body shop supplies as easy as possible.

Our shipping department makes every effort to ship your order in a manner that allows for easy offloading, including arranging a carrier and extending the discounts provided to us by our shipping partners. When possible, a flatbed is used to transport larger items.

If your order consists of a product(s) that ships LTL, you are responsible for offloading. Please note there are additional charges for residential delivery, delivery to construction sites, college campuses, etc. If you are unsure as to whether you have a special circumstance, contact Eagle Equipment’s Customer Service department prior to the shipment of your order and we will gladly assist you with special handling.

We will contact you the morning following shipment to advise you of the estimated delivery date, as well as other pertinent order information. If you require a specific delivery time, we will provide you with a tracking/PRO number and the phone number of the delivering terminal. The dispatcher will then schedule the delivery at your convenience.

A car lift, tire changer, brake lathe, wheel balancer, spray booth or other large auto body shop supplies may require the use of a forklift and are too large for the use of a truck with a lift gate. A lift gate can be used to offload items such as; tire changers/balancers, power pullers and ductwork. In addition, certain paint spray booths are shipped in special large crates that require the use of a forklift with extensions to support the extra weight.

Careful inspection is required in order to make sure your order has not sustained any damage during transit. Upon delivery, please visually inspect the external packaging for any crushed corners, loose box flaps, broken straps, retaping etc. While you have the right to refuse any shipment you feel is damaged, we ask that you accept delivery and notate possible damage on the delivery receipt. IF THE DAMAGE IS EXTENSIVE, YOU MAY CALL US WHILE THE DRIVER STANDS BY, TO DETERMINE IF THE SHIPMENT SHOULD BE REFUSED. We recommend that you make a copy of the delivery receipt for your records.

Please retain all shipping containers and internal packaging, as it is likely an inspection will be required if your order arrives damaged. Call us immediately and we will instruct you on what to do, should your unit require replacement. We may ask you to take pictures using your cell phone or a digital camera and forward them to us. Photos are a great way for us to expedite the process of filing a damage claim if necessary. Rest assured that should a replacement be needed, we will handle it as quickly as possible.

Smaller items that are shipped via UPS or FedEx Ground may not require a signature. If delivery is attempted for packages requiring a signature and no one is there to sign, two more attempts will be made before the package is returned to its origination. If an order is returned to its point of origination and you want it reshipped, you will be billed for the outbound shipping charge.

While every effort is made to ensure your order ships correctly, from time to time, errors occur. PLEASE REPORT ALL SHORTAGES AND/OR DEFECTS TO US WITHIN SEVEN (7) DAYS OF RECEIPT. FOR AN EASY INVENTORY OF PAINT BOOTH COMPONENTS, REFER TO THE BILL OF MATERIALS LOCATED APPROXIMATELY HALF WAY THROUGH THE INSTALLATION MANUAL. THIS DOCUMENT LISTS ALL COMPONENTS ACCORDING TO QUANTITY, DESCRIPTION AND PART NUMBER.

AFTER SEVEN DAYS, YOU WILL BE CHARGED OUTBOUND SHIPPING FOR ANY ITEM(S) RESHIPPED.

Please feel free to contact us. We are here to ensure your experience with us is a pleasant one. Again, thank you for choosing Eagle Equipment.

Shopping Cart

Your cart is currently empty.

Tag: Automotive Equipment